會員中心 | English | 繁體中文

航天航空 - 盤頭螺釘偏十字槽緊公差普通桿短螺紋合金鍍鎘 - 等級：1100MPa(室溫)/235℃ EN 2897 - 1996

☆ 收藏

選擇規格尺寸點擊↓

030

040

050

060

070

080

100

120

尺寸單位: mm

歐標EN 2897 - 1996 EN2897 2897EN 航天航空 - 盤頭螺釘偏十字槽緊公差普通桿短螺紋合金鍍鎘 - 等級：1100MPa(室溫)/235℃

在線制圖

EN 2897 - 1996 航天航空 - 盤頭螺釘偏十字槽緊公差普通桿短螺紋合金鍍鎘 - 等級：1100MPa(室溫)/235℃

掃一掃分享

公差最小破壞扭矩牌號等級

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

尺寸代碼

030

040

050

060

070

080

100

120

d	螺紋
D₁	公稱
	最大值
	最小值
D₂	最大值=公稱
	最小值
D₃	最小值
D₄	公稱
	最大值
	最小值
D₅ ^①	最小值=公稱
	最大值
E	最大值=公稱
	最小值
L₁ ^④	±0.2	代碼
		公稱
L₂
L₃
R	最大值=公稱
	最小值
S ^②	最大值
	最小值
槽號	ISO 7994
千件重kg ^③	7.85kg/dm3	⑤
		⑥

MJ3×0.5-4h6h	MJ4×0.7-4h6h	MJ5×0.8-4h6h	MJ6×1-4h6h	MJ7×1-4h6h	MJ8×1-4h6h	MJ10×1.25-4h6h	MJ12×1.25-4h6h
3	4	5	6	7	8	10	12
3.006	4.01	5.01	6.01	7.013	8.013	10.013	12.016
2.969	3.965	4.965	5.965	6.962	7.962	9.962	11.959
6	8	10	12	14	16	20	24
5.7	7.7	9.7	11.7	13.7	15.7	19.7	23.7
4.7	6.7	8.7	10.7	12.7	14.7	18.7	22.7
2.3	3	3.4	4.2	5.2	6.2	7.9	9.8
2.3	3	3.9	4.7	5.7	6.7	8.4	10.3
1.8	2.5	2.9	3.7	4.7	5.7	7.4	9.3
/	1.1	1.5	1.5	1.9	1.9	2.4	2.4
/	1.24	1.64	1.64	2.04	2.04	2.54	2.54
1.8	2.4	3	3.6	4.2	4.8	6	7.2
1.6	2.2	2.8	3.3	3.9	4.5	5.7	6.9
002 to 030	002 to 040	003 to 050	003 to 060	004 to 070	004 to 080	005 to 100	006 to 120
2 to 30	2 to 40	3 to 50	3 to 60	4 to 70	4 to 80	5 to 100	6 to 120
6	7.5	9	10	11	11.5	14.5	16
/	5	6	7	7	7.5	9	10
0.4	0.4	0.5	0.7	0.7	0.7	0.8	0.9
0.2	0.2	0.3	0.5	0.5	0.5	0.6	0.6
1.2	1.6	2	2.4	2.8	3.2	4	4.8
0.3	0.4	0.5	0.6	0.7	0.8	1	1.2
R3	R4	R5	R6	R7	R8	R10	R12
0.67	1.63	3.31	5.47	9.36	12.76	25.12	44.39
0.06	0.1	0.15	0.22	0.3	0.4	0.61	0.89

①,D? 為可選形式。
②,S處形狀可選。
③,適用于沒有孔的螺釘。
④,Increments:(1 for L? ≤ 30, 2 for 30 < L? ≤ 100, 4 for L? > 100). If greater lengths are required, they shall be chosen using the above increments. The length code corresponds to the length L?, completed by one or two zeros to the left, where necessary, to obtain a three digit code.
⑤,Value for head and first L?.
⑥,Increase for each additional millimetre of L?.
⑦,十字槽相關參數參見 ISO 7994。

工藝相關 (1)

ISO 7994 - 1985

沉頭（盤頭、圓頭等）用高扭矩十字槽

引用參考 (14)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 3098.25 - 2020

緊固件機械性能不銹鋼和鎳合金緊固件選用指南

統一螺紋搓制和滾制前的毛坯直徑

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

螺栓、螺釘和螺柱性能等級及常用牌號及近似牌號（按GB/T3098.1-2010相關規定選擇）非合金鋼和低合金鋼和鑄鋼的硬度值轉換表

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息 (46)

1	[國標] GB /T 818 - 2016	十字槽盤頭螺釘 Pan Head Screws with Cross Recess 供應商(13)
2	[國標] GB /T 823 - 2016	十字槽小盤頭螺釘 Small Pan Head Screws with Cross Recess 供應商(4)
3	[國標] GB /T 818 - 2000	十字槽盤頭螺釘 Pan Head Screws with Cross Recess 供應商(13)
4	[國標] GB 823 - 1988	十字槽小盤頭螺釘 Cross Recessed Small Pan Head Screws 供應商(4)
5	[國標] GB 818 - 1985	十字槽盤頭螺釘 Cross Recessed Pan Head Screws 供應商(13)
6	[國標] GB 818 - 1976	十字槽盤頭螺釘 Cross Recessed Pan Head Screws 供應商(13)
7	[德標] DIN 967 - 2018	十字槽盤頭凸緣螺釘 A級 Cross Recessed Pan Head Screws with Collar - Product Grade A 供應商(1)
8	[德標] DIN 967 - 2002	十字槽盤頭凸緣螺釘 A級 Cross Recessed Pan Head Screws with Collar - Product Grade A 供應商(1)
9	[德標] DIN 7985 - 1990	十字槽球面(矮)圓柱頭[盤頭]螺釘 Cross Recessed Raised Cheese Head Screws 供應商(5)
10	[德標] DIN 6929 (CE) - 2013	粗牙十字槽盤頭細桿螺釘 Pan Head Screws with Cross Recess
11	[國際] ISO 7045 - 2011	A級十字槽盤頭螺釘 H型或Z型 Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A 供應商(3)
12	[國際] ISO 7045 - 1994	十字槽盤頭螺釘 Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A 供應商(3)
13	[日標] JIS B 1111 (T3) - 2017	十字槽盤頭螺釘 [表3] Cross Recessed Pan Head Screws 供應商(2)
14	[日標] JIS B 1111 (T1) - 2006	十字槽盤頭螺釘 [表1] Cross Recessed Pan Head Screws 供應商(2)
15	[日標] JIS B 1111 (T1) - 1996	十字槽盤頭螺釘 [表1] Cross Recessed Pan Head Screws 供應商(2)
16	[日標] JIS B 1111 (JA3) - 2017	十字槽盤頭螺釘 [附屬表 JA.3] Cross Recessed Pan Head Screws
17	[日標] JIS B 1111 (A1) - 2006	十字槽盤頭螺釘 [附屬表1] Cross Recessed Pan Head Screws
18	[日標] JIS B 1111 (A1) - 1996	十字槽盤頭螺釘 [附屬表1] Cross Recessed Pan Head Screws
19	[日標] JIS B 1119 (2P) - 1986	眼鏡框架用 - 十一字槽盤頭螺釘 Spectacle Frames - Cross-recessed Slotted Pan Head Machine Screws
20	[汽標代號] Q 214	十字槽盤頭螺釘 Cross Recessed Pan Head Screws 供應商(1)
21	[美標] ASME/ANSI B 18.6.3 - 2010	十字槽盤頭螺釘Table18 Cross Recessed Pan Head Machine Screws 供應商(3)
22	[美標] ASME/ANSI B 18.6.7M - 1998	米制十字槽盤頭螺釘Table11 Metric Cross Recessed Pan Head Screws
23	[美標] ASME/ANSI B 18.6.7M - 1998	米制米字槽盤頭螺釘Table12 Metric PZ Drives Pan Head Screws
24	[歐標] EN 2884 - 2024	航天航空 - 盤頭螺釘偏十字槽光桿公差h12 短螺紋鈦合金陽極氧化 MoS2潤滑 - 等級：1100MPa(室溫)/315℃ Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃
25	[歐標] EN 2884 - 1996	航天航空 - 盤頭螺釘偏十字槽光桿公差h12 短螺紋鈦合金陽極氧化 MoS2潤滑 - 等級：1100MPa(室溫)/315℃ Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃
26	[意大利] UNI 7687	十字槽盤頭螺釘 Recessed Raised Cheese (Filister) Head Screws - ISO Metric Coarse Thread - Product Grade A
27	[法國] NF E 25-121 - 1994	十字槽盤頭螺釘 Pan Head Screws with Type H or Type Z Cross Recess - Product A
28	[法國] NF L 22-171 - 1984	十字槽盤頭螺栓符合NF L22-072 Bolt, Pan Head, Current Use, NF L22-072 Cross Recess.
29	[法國] NF L 22-176 - 1984	十字槽錐端盤頭螺釘符合NF L22-072 Bolt, Pan Head, Amagnetic with Cone Point NF L 22-072 Cross Recess
30	[法國] NF L 22-179 - 1984	十字槽全螺紋盤頭螺釘符合NF L22-070 Bolt, Pan Head, Threaded to hHead, NF L 22-070 Cross Recess
31	[法國] NF L 22-274 - 1982	十字槽盤頭螺釘符合B.N.A.E. ISO螺紋 Pan Head Screws, B.N.A.E. Cross Recess. ISO Thread
32	[英標] BS 1981 - 1991	米字槽盤頭螺釘Table12 Cross Recessed Pan Head Machine Screws
33	[英標] BS 450 - 1958	英制十字槽盤頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 5] Cross Recessed Pan Head Screws with B.S.W. & B.S.F. Threads [Table 5]
34	[澳標] AS /NZS 1427 - 1996	米制十字槽盤頭螺釘 ISO Metric Cross-Recess Pan Head Screws
35	[原電子工業部] SJ 2828 - 1987	十字槽盤頭螺釘 Cross Recessed Pan Head Screws
36	[臺灣] CNS 9674 - 1988	十字槽扁圓頂錐頭螺釘 Cross Recessed Binding Head Machine Screws
37	[臺灣] CNS 9677 - 1988	十字槽扁圓頂盤頭螺釘 Corss Recessed Oval Pan Head Machine Screws
38	[韓標] KS B 1023 (T6) - 2016 (R2021)	十字槽盤頭螺釘 Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A
39	[韓標] KS B 1023 (T1) - 2001	十字槽盤頭螺釘 Cross Recessed Pan Head Screws
40	[德標] DIN EN ISO 7045 - 2011	十字槽盤頭螺釘 - 產品等級A級 Pan Head Screws with Type H or Type Z Cross Recess - Product Grade A 供應商(5)
41	[軍標] GJB 3374 (/22~/24) - 1998	MJ螺紋十字槽盤頭螺栓 MJ Thread, Cross Recesse Pan Head Bolt
42	[印標] IS 7483 - 2005	十字槽盤頭螺釘 A級 Pan Head Screws with Type H or Z Cross Recess - Product Grade A
43	[美標] ASME B 18.6.3 (H5B-I/H5C-IA) - 2024	十字槽盤頭螺釘 (ASTM F837,F468) [TABLE 2.2.5-2,-3 I/IA] Type I Cross Recessed Pan Head Screws (ASTM F837,F468) [TABLE 2.2.5-2,-3 I/IA] 供應商(3)
44	[美標] ASME B 18.6.3 (T18-I/T19-IA) - 2013	十字槽盤頭螺釘 [Table 18] (ASTM F837, F468) Type I Cross Recessed Pan Head Screws (ASTM F837, F468) 供應商(3)
45	[航天] QJ 2376 - 1992	十字槽盤頭螺釘 Cross Recessed Pan Head Screws
46	[深圳緊固件行業協會標準] T/SZJGJ 001 (F) - 2024	十字槽盤頭機器螺釘 Pan Head Screws with Cross Recess

標準編號 / Standard Code： EN 2897 - 1996
中文名稱 / Chinese Name： 航天航空 - 盤頭螺釘偏十字槽緊公差普通桿短螺紋合金鍍鎘 - 等級：1100MPa(室溫)/235℃
英文名稱 / English Name： Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235℃
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page

Data Source: YJT Fastener Database (164580.com)
Standard: EN 2897 - 1996
Chinese Name: 航天航空 - 盤頭螺釘偏十字槽緊公差普通桿短螺紋合金鍍鎘 - 等級：1100MPa(室溫)/235℃
English Name: Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235℃
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.

航天航空 - 盤頭螺釘 偏十字槽 緊公差 普通桿 短螺紋 合金 鍍鎘 - 等級：1100MPa(室溫)/235℃ EN 2897 - 1996

工藝相關 (1)

引用參考 (14)

類似標準及供貨信息 (46)

航天航空 - 盤頭螺釘偏十字槽緊公差普通桿短螺紋合金鍍鎘 - 等級：1100MPa(室溫)/235℃ EN 2897 - 1996